Bio-Torq™ Biofilm Remover

What Makes Bio-Torq Biofilm Remover Different?

Many surfaces appear clean but still contain embedded organic residues trapped beneath the surface. These residues form biofilm, a sticky matrix of fats, proteins and starches that traps dirt, supports odours and protects unwanted microorganisms.

Bio-Torq Biofilm Remover uses a dual-action system:

• Plant-based surfactants for rapid surface degreasing
  
• Targeted enzymes to digest biofilm at its source
  

This combination allows Bio-Torq to remove layer upon layer of embedded grime, rather than simply pushing contamination around


The Science Behind Biofilm Removal

Biofilm is not just dirt, it is a structured organic matrix that shields microbes from detergents and disinfectants. Traditional cleaners struggle to penetrate this layer.

Bio-Torq Biofilm Remover contains a precision blend of enzymes that dismantle biofilm chemically:

• Protease – Breaks down protein-based attachment points used by biofilms
  
• Lipase – Digests fats and grease that cause odours and slipperiness
  
• Amylase – Breaks down starches that act like glue, binding dirt to surfaces
  

By removing these structural components, the biofilm collapses, allowing surfaces to be truly clean, odour-free and ready for disinfection if required

Designed for Food-Contact & High-Risk Areas

Bio-Torq Biofilm Remover is specifically engineered for food-contact surfaces and hygiene-critical environments where bacterial cleaners are often restricted. It delivers deep enzymatic cleaning without increasing CFU counts, making it suitable for regulated spaces when used correctly.

• Apply using mop & bucket, trigger spray, foamer or auto-sprayer
  
• Works well in high-pressure washers
  
• Allow 5–10 minutes dwell time depending on soiling level
  
• Introduce mechanical action (scrubbing or spraying) if required
  
• Rinse or remove loosened soils
  

Recommended Dilution (Concentrate):

• Up to 1:30 for deep-clean foaming applications
• Adjust dilution based on soil load and application needs
  

After cleaning, follow your standard disinfection or sterilisation protocol if required.

Bio-Torq™ Biofilm Remover is ideal for:

Industrial

• Stainless steel surfaces
• Food processing floors
• Deep cleaning and odour control
  

Commercial

• Kitchens and food prep areas
• Counters, beer lines and service areas
• Ablutions and showers
  

Domestic

• Kitchen floors and countertops
• Bathrooms and tiled areas
• Deep cleaning of hard surfaces
  

Excellent for floors, grout, stainless steel, tiles, counters and high-touch hard surfaces where organic build-up occurs.

• Actively removes biofilm, not just surface dirt
• Cuts through fats, oils and grease
• Eliminates odours at the source
• Deep-cleans pores, grout and irregular surfaces
• Non-corrosive, neutral pH (7.0–8.5)
• No added fragrance
• Salmonella not detected
• Biodegradable surfactants
• No phosphates, no solvents, low VOC
• Suitable for food-contact surface cleaning when used correctly
• Global GreenTag Certified (Bronze)

Give it dwell time
Biofilm isn’t loose dirt — it’s a structured organic layer. Allow 5–10 minutes contact time so enzymes can break down the biofilm matrix before rinsing or scrubbing.

Use foam for vertical and grout-heavy areas
Foaming or trigger-spray application helps the product cling to walls, grout lines and vertical stainless-steel surfaces, improving penetration and cleaning performance.

Scrub after activation, not before
Let enzymes loosen the biofilm first, then apply mechanical action. This reduces effort and prevents smearing partially broken-down residues.

Prep surfaces before disinfection
Biofilm blocks disinfectants. Always clean with Bio-Torq Biofilm Remover before applying sanitizers or disinfectants for maximum hygiene effectiveness.

Make it part of a routine
Regular use prevents biofilm from re-establishing, keeping floors less slippery, surfaces odour-free and cleaning cycles shorter over time.

Enzymes: Protease, Lipase and Amylase enzyme blend

Surfactants: Plant-based biodegradable surfactants

Appearance: Clear liquid

Fragrance: None added

pH: 7.0 – 8.5

Shelf life: 2 years unopened

Hazard classification: Not classified as hazardous to end users when used as directed

Bio-Torq™ Biofilm Remover is formulated to deliver industrial-level cleaning performance while remaining safe for users and the environment when used as directed.

• Neutral pH, non-corrosive
• Low VOC, biodegradable formulation
• Safe for routine use in high-traffic environments
  

Standard precautions apply:

• Do not ingest
• Avoid eye contact
• Wear gloves for prolonged contact
• Wash hands after use
• Store in a cool, dry place away from foodstuffs
  

Always refer to the label for handling guidance.

What exactly is biofilm?
Biofilm is a sticky organic layer made up of fats, proteins and starches that traps dirt and protects microorganisms. It bonds tightly to surfaces and cannot be fully removed with standard detergents.

Why don’t normal cleaners remove biofilm?
Traditional cleaners mainly act on surface dirt. Biofilm sits below the surface, inside pores and grout. Without enzymes to break its structure, it remains behind even when surfaces look clean.

Does this product contain bacteria?
No. Bio-Torq Biofilm Remover uses enzymes only, not live bacteria. This makes it suitable for food-contact and hygiene-sensitive environments where bacterial cleaners are restricted.

Is it safe for food-contact surfaces?
Yes. When used as directed and rinsed appropriately, it is suitable for cleaning food-contact surfaces before standard disinfection protocols are applied.

Can I use it with pressure washers?
Yes. Bio-Torq Biofilm Remover performs well in high-pressure washers, auto-sprayers and foaming systems, making it ideal for industrial and commercial cleaning.

Will it remove odours?
Yes. Odours are caused by residual organic material trapped in biofilm. By removing the biofilm itself, odours are eliminated at the source rather than masked.

Is it corrosive or harsh on surfaces?
No. The formulation is pH-neutral, non-corrosive and safe for stainless steel, tiles, grout and most hard surfaces when used as directed.

Do I still need to disinfect after cleaning?
Yes, if your environment requires it. Bio-Torq Biofilm Remover prepares surfaces by removing biofilm, allowing disinfectants to work effectively afterward.

Is it environmentally responsible?
Yes. It contains biodegradable surfactants, no phosphates or solvents, and has low VOC content — making it safer for users, surfaces and wastewater systems.